Introduction to Electronics Week 3 Quiz Answer

Introduction to Electronics Week 3 Quiz Answer

Introduction to Electronics 

Week 3 Quiz Answer


In this article i am gone to share Coursera Course Introduction to Electronics Week 3 Quiz Answer with you..


Week 3 Quiz


Question 1)

Consider the following circuit where C=200nF.


For the circuit to have a bandwidth of ωb=500rad/s and a passband gain of -400, what must be the values of Rf and R1 ?


Enter the value of R1 in ohms.


Answer: 25





Question 2)

For the circuit of question 1, enter the value of Rf in KILO ohms.


Answer: 10





Question 3)

For the following circuit, R1=100Ω. Select the values of Rf and C to have a passband gain of -100 and a corner frequency of 1,000 rad/s.


Enter the value of C in uF.



Answer: 10   




Question 4)

For the circuit of question 3, enter the value of  Rf in .


Answer: 10






Question 5)

What Is the DC gain of a filter circuit that has the given transfer function?


Answer: 2





Question 6)

What is the bandwidth in radians-per-second of a filter circuit that has the given transfer function?

Answer: 5  





Question 7)

A sine wave with amplitude 2 V and frequency 1358 Hz is applied to the circuit

shown. If Rf=10 kΩ, R1=1.5 kΩ , and C = 0.1 μF , what is the amplitude of the output sine wave?


Answer: 10.5  




In the filter circuit shown, R1 = 10kΩ, R2 = 10kΩ, R3 = 4kΩ, R4 = 6.8kΩ, C1 = 5.3nF, and C2 = 5.3nF. 1 nF = 1 nanofarad = 10-9 farads. What is the dc gain of this filter? Calculate your answer to at least the nearest tenth.




Answer: 2.8





Question 9)

For the circuit of question 8, what is the resonance frequency in kilohertz? Calculate your answer to at least the nearest tenth.


Answer: 3





Question 10)

For the circuit of question 8, what is the quality factor? Calculate your answer to at least the nearest tenth.


Answer: 3.3





Question 11)

In the filter circuit shown, R1 = 10kΩ, R2 = 10kΩ, R3 = 2kΩ, R4 = 2kΩ, C1 = 0.15 μF,

and C2 = 0.1 μF. 1 μF = 1 microfarad = 10-6 farads. Which of the following are not true?




  • The resonance frequency increases as the value of C2 is decreased.
  • The DC gain is 2
  • There is a peak in the transfer function of this filter.
  • The resonance frequency is approximately 130 radians per second.









______________________________________________________________________________



Introduction to Electronics



Introduction to Electronics Week 2 Quiz Answer


Introduction to Electronics Week 3 Quiz Answer


Introduction to Electronics Week 4 Quiz Answer


Introduction to Electronics Week 5 Quiz Answer


Introduction to Electronics Week 6 Quiz Answer


Introduction to Electronics Week 7 Quiz Answer











Post a Comment

0 Comments